检测认证网

 找回密码
 立即注册

QQ登录

只需一步,快速开始

扫一扫,访问微社区

搜索
查看: 30|回复: 0

Laminate flooring testing ANSI/NALFA LF-01-2011

[复制链接]
发表于 2017-6-15 10:55:05 | 显示全部楼层 |阅读模式
Laminate flooring testing

Testing method: ANSI/NALFA LF-01-2011

Testing items: Thickness Swell, Light Resistance, Cleanability/Stain Resistance, Large Ball Impact Resistance, Wear Resistance, Dimensional Tolerance, Castor Chair, Surface Bond.
3c6d55fbb2fb43168ccb1c0d23a4462308f7d3f5.jpg
Testing method: ASTM C1028 Static Coefficient of Friction

ASTM F970 Static Load Test

ASTM E662 Smoke Density:   

This test method provides a means for determining the specific optical density of the smoke generated by specimens of materials and assemblies under the specified exposure conditions. Values determined by this test are specific to the specimen or assembly in the form and thickness tested and are not to be considered inherent fundamental properties of the material tested.




ASTM E648 Critical Radiant Flux (Radiant heat):

This fire test response standard is designed to provide a basis for estimating one aspect of the fire exposure behavior of a floor-covering system installed in a building corridor. The fundamental assumption inherent in the test is that critical radiant flux is one measure of the sensitivity to flame spread of floor-covering systems in a building corridor.




ASTM E90 Aiborne Sound Transmission:

This test method covers the laboratory measurement of airborne sound transmission loss of building partitions.Laboratories are designed so the test specimen constitutes the primary sound transmission path between the two test rooms and so approximately diffuse sound fields exist in the rooms.




ASTM E492 Impact Sound Transmission

This test method covers the laboratory measurement of impact sound transmission of floor-ceiling assemblies using a standardized tapping machine. It is assumed that the test specimen constitutes the primary sound transmission path into a receiving room located directly below and that a good approximation to a diffuse sound field exists in this room.




ASTM C518 Steady-State Thermal Transmission Properties

This test method covers the measurement of steady state thermal transmission through flat slab specimens using a heat flow meter apparatus.Fourier’s law of heat conduction is used to calculate thermal conductivity, and thermal resistivity or thermal resistance and thermal conductance.




ASTM F2199 Dimensional stability-resilient flooring

This test method covers the determination of the change in linear dimensions of resilient floor tile after exposure to heat.




ASTM F925 Resistance to Chemicals

This test method provides a procedure for determining the resistance of resilient floor covering to surface deterioration when exposed to various chemical reagents. This test method is not intended as a staining test nor as a method to judge surface and appearance restoration of the sample after exposure to the chemical reagent.




ASTM F963-11 HEAVY METAL TEST  




SGS-CSTC Standards Technical Services Co., Ltd.

No.31 Xianghong Road, Xiang'An Torch Industrial Zone, Xiamen, Fujian Province, China

Phone:   86 (0592) 576 5860

Mobile:  86 15080313580

Fax:    86 (0592) 576 5380

E-mail :   Crocker.hua@sgs.com






检测认证网 www.17025.org
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

QQ|纺织品报告助手|手机版|Archiver|SiteMap|检测认证网 ( 苏ICP备11050521号-8 )

GMT+8, 2017-6-25 10:05 , Processed in 0.457930 second(s), 20 queries , Apc On.

快速回复 返回顶部 返回列表